BRDM-2

BRDM-2: Recconnaisance and Command Vehicle

Statistics

HMG: 14.5mm KPVT
Ammunition Stowage: 500 ready/0 stowed
Default Ammunition: 500/0 14.5mm AP

Coaxial MG: 7.62mm PKT
Ammunition Stowage: 2000 ready/0 stowed
Default Ammunition: 2000/0 7.62mm

Armour Protection:
Frontal Turret Armour: Thin. Protected vs HMG
Frontal Hull Armour: Thin. Protected vs HMG

Combat Mass: 7tonnes
Engine Power: 140hp
Height: 2.3m to turret roof.

General

the BRDM-2 is a lightly armoured Russian scout truck, first produced in 1962, and has since seen service in a large array of armies, and is still used by several countries today. the BRDM-2 turret is operated with hand cranks, and the gunner has a single-magnification pp-61AM sight, with 2.6x magnification. the TC is seated in the hull front, besides the driver, and has a forward facing window, several vision blocks, and a TKN-3 periscope, with 5x magnification. there was reports in the 1980 afghan war between Russia and Afghanistan, that the Mujahideen were capable of penetrating the armour behind the wheel wells of the BRDM-2 with AK-47 bullets.

Thermal Signature

Crew Positions

Tank Commander's Position F7

File:BRDM2 TC unbuttoned.jpg

TC's unbuttoned view

In Steel Beasts the tank commander's (TC) position on the BRDM2 is crew-able. The TC's position is accessed by pressing F7.

From this position the user can raise and lower their perspective (and exposure level) by holding the Q key (to go up) and the Z key (to go down). The TC can also button or unbutton (close and open the TC's hatch) by pressing the B key (toggle). While unbuttoned, the TC may also wish to use binoculars to get a closer view on a distant area by pressing the N key (toggle).

Gunner's Position F6

Gunner's Primary Sight (GPS)

The PP-61AM periscopic sight is used by BRDM-2 and BTR gunners to aim their 14.5mm KPV-T and 7.62mm PK-T guns. It is a simple static sight with a fixed 2.6x magnification.

Note that there is no thermal channel, and no light amplification available. In other words, even at night the gunner has to use his eyesight!

Sight Symbology

On the left side of the sight are the markings for the 14.5mm gun, while on the right side are the superelevation offsets for the 7.62mm gun. The numbers denote distanced in hundreds of meters. Across the top of the sight is a series of vertical lines used for range determination. The long central line is four mils high, while the short lines to either side are two mils high. The space between the lines is one mil each. All mil measurements are in Russian mils.

Note that there is no compensation for parallax so at extremely short ranges the sight markings will be inaccurate!

Driver's Position F9

Purchase SB Pro PE