Voice Attack profile for SB Pro PE 4.1 1.0.0

**August 2nd 2019**
**Yassy's Steel Beasts Pro PE Voice Attack Profile**
**SBProPE v4.157 / Profile v1.0**

Please provide feedback for future versions! Functionality to add, calls to change for realism, etc.

**INSTALLATION**
1. Unzip the contents of this archive into a temporary folder.

2. Start VoiceAttack

3. Press the 'More Profile Actions' button in the main window of VA.

4. Choose 'Import...' and browse to the temporary folder you created during the unzipping.

5. Select the .vap file.

6. Restart Voice Attack

NOTE: Voice Attack works best if you allow the speech recognition engine to be trained by your voice. Please refer to the documentation of VA.

**KEYWORDS**
NOTE: Words in CAPITAL LETTERS are voice commands. Words in between brackets () are optional in the sentence.
NOTE: The term UNIT refers to a group (of vehicles) under your direct control. The term vehicle refers to a single vehicle.

*GENERAL*
DISPLAY FRAMERATE - Toggles the Framerate counter on screen.

*POSITIONS*
CHANGE TO GUNNER - Gunner's position
CHANGE TO COMMANDER - Commander's position
CHANGE TO DRIVER - Driver's position
CHANGE TO LOADER - Loader's position
CHANGE TO EXTERNAL - External Camera
CHANGE TO SQUAD LEADER - Mounted squad leader's position
NEXT LEADER - Switch to Lead Vehicle in NEXT group
NEXT VEHICLE - Switch to next vehicle in CURRENT group.
NEXT ENGAGED UNIT - Switch to next engaged unit.

*VIEWS*
GO EYE VIEW - View 1 (Eye view)
GO PRIMARY SIGHT - View 2 (Pri Sight)
GO SECONDARY SIGHT - View 3 (Sec Sight)
GO VISION BLOCKS - View 4 (Vision Blocks)
GO MAP VIEW - Opens the Map View
OPEN MAP - Opens the Map View
MAP VIEW - Opens the Map View
DISPLAY MAP - Opens the Map View

*DRIVING CONTROLS*
(DRIVER) FORWARD / FORWARD SLOW - Orders Driver to advance at slow speed.
(DRIVER) FORWARD FAST - Orders Driver to advance at intermediate speed.
(DRIVER) FORWARD FULL - Order Driver to advance at full speed.
(DRIVER) REVERSE - Orders Driver to go into reverse.
(DRIVER) STOP - Orders driver to stop the vehicle.
(DRIVER) (STEER) RIGHT / LEFT - Orders the driver to steer Left and Right 22.5 degrees.
(DRIVER) ASSUME BATTLE POSITION - Orders the driver to find a Hull Down position or enter a Tank Emplacement (forward arc)
(DRIVER) PROCEED - Orders the driver to continue on the active route.
(DRIVER) CONTINUE (ROUTE) - Orders the driver to continue on the active route.

*UNIT CONTROLS*
(PLATOON) GO ECHELON LEFT - Orders the unit to change to Echelon Left formation.
(PLATOON) GO LINE - Orders the unit to change to Line formation.
(PLATOON) GO ECHELON RIGHT - Orders the unit to change to Echelon Right formation.
(PLATOON) GO WEDGE - Orders the unit to change to Wedge formation.
(PLATOON) GO COLUMN - Orders the unit to change to Column formation.
(PLATOON) GO VEE - Orders the unit to change to Vee formation.
(PLATOON) INCREASE SPACING - Orders the unit to increase the spacing of vehicles in the formation.
(PLATOON) SPREAD OUT - Orders the unit to increase the spacing of vehicles in the formation.
(PLATOON) DECREASE SPACING - Orders the unit to decrease the spacing of vehicles in the formation.
(PLATOON) CLOSE IN - Orders the unit to decrease the spacing of vehicles in the formation.
(PLATOON) HOLD FIRE - Orders the unit to hold fire.
(PLATOON) FIRE AT WILL - Orders the unit to fire at will.
(PLATOON) POP SMOKE - Orders the unit to pop smoke.
(PLATOON) ENGINE SMOKE - Orders the unit to toggle the engine smoke generators.
(PLATOON) SMOKE GENERATORS - Orders the unit to toggle the engine smoke generators.
(PLATOON) UNLOAD TROOPS - Orders the unit to disembark mounted infantry.
(PLATOON) LOAD TROOPS - Orders Infantry to embark their support vehicles.
(PLATOON) TOGGLE TROOP HATCH - Orders the unit to cycle the troop hatches open/closed.

*GUNNER CONTROLS*
MOVE UP - Moves higher in the turret.
MOVE DOWN - Moves lower in the turret.
TOGGLE HATCH - Open or closes the Gunner's hatch.
TOGGLE ZOOM - Cycles magnification settings.
TOGGLE GUN - Cycles between main gun and machine gun.
IDENTIFIED (TARGET) - Asks Commander to stop overriding the turret.
(COMMANDER) SLEW (TO) TARGET - Asks Commander to slew turret to target.
(COMMANDER) SHOW TARGET - Asks Commander to slew turret to target.
LOAD AMMO ONE - Set Ammo type 1 for next shot main gun.
LOAD AMMO TWO - Set Ammo type 2 for next shot main gun.
LOAD AMMO THREE - Set Ammo type 3 for next shot main gun.
LOAD AMMO FOUR - Set Ammo type 4 for next shot main gun.
LOAD SAYBO - Set Ammo type to Sabot for next shot main gun (Ammo Type 1 usually).
LOAD HEAT - Set Ammo type to HEAT for next shot main gun (Ammo Type 2 usually).
(SELECT) NORMAL FIRE CONTROL - Set Fire Control to NORMAL mode.
(SELECT) FIRE CONTROL NORMAL - Set Fire Control to NORMAL mode.
(SELECT) EMERGENCY FIRE CONTROL - Set Fire Control to EMERGENCY mode.
(SELECT) FIRE CONTROL EMERGENCY - Set Fire Control to EMERGENCY mode.
(SELECT) MANUAL FIRE CONTROL - Set Fire Control to MANUAL mode.
(SELECT) FIRE CONTROL MANUAL - Set Fire Control to MANUAL mode.
CYCLE FUSING - Cycle fuse setting.
CYCLE RATE OF FIRE - Cycle rate of fire setting.
CYCLE SALVO - Cycle length of salvo.
TOGGLE SHIELD DOORS - Opens or closes the sight shield doors.
(TOGGLE) THERMAL SIGHT - Toggle TIS on/standby.

*COMMANDER CONTROLS*
MOVE UP - Moves higher in the turret.
MOVE DOWN - Moves lower in the turret.
TOGGLE COMMANDER HATCH - Opens or closes the Commander's Hatch
BUTTON UP - Opens or closes the Commander's Hatch
(GUNNER) FIRE - Orders the Gunner to fire the gun.
(GUNNER) SHOOT - Orders the Gunner to fire the gun.
TOGGLE ZOOM - Cycles magnification settings.
TOGGLE GUN - Orders the Gunner to switch from main gun to machine gun or vice versa.
LOADER SAYBO - Orders the Loader to load Sabot (Ammo Type 1) for the next shot.
LOADER HEAT - Orders the Loader to load HEAT (Ammo Type 2) for the next shot.
LOAD AMMO ONE - Set Ammo type 1 for next shot main gun.
LOAD AMMO TWO - Set Ammo type 2 for next shot main gun.
LOAD AMMO THREE - Set Ammo type 3 for next shot main gun.
LOAD AMMO FOUR - Set Ammo type 4 for next shot main gun.
LOAD SAYBO - Set Ammo type to Sabot for next shot main gun (Ammo Type 1 usually).
LOAD HEAT - Set Ammo type to HEAT for next shot main gun (Ammo Type 2 usually).
(LOADER) READY SAYBO - Orders the Loader to transfer Sabot (Ammo Type 1) from stowed to ready compartment.
(LOADER) READY HEAT - Orders the Loader to transfer HEAT (Ammo Type 2) from stowed to ready compartment.
(LOADER) READY AMMO ONE - Orders the Loader to transfer Ammo Type 1 from stowed to ready compartment.
(LOADER) READY AMMO TWO - Orders the Loader to transfer Ammo Type 2 from stowed to ready compartment.
(LOADER) READY AMMO THREE - Orders the Loader to transfer Ammo Type 3 from stowed to ready compartment.
(LOADER) READY AMMO FOUR - Orders the Loader to transfer Ammo Type 4 from stowed to ready compartment.
(LOADER) READY ALL AMMO - Orders the Loader to transfer All Ammo Types from stowed to ready compartment.
(SELECT) NORMAL FIRE CONTROL - Set Fire Control to NORMAL mode.
(SELECT) FIRE CONTROL NORMAL - Set Fire Control to NORMAL mode.
(SELECT) EMERGENCY FIRE CONTROL - Set Fire Control to EMERGENCY mode.
(SELECT) FIRE CONTROL EMERGENCY - Set Fire Control to EMERGENCY mode.
(SELECT) MANUAL FIRE CONTROL - Set Fire Control to MANUAL mode.
(SELECT) FIRE CONTROL MANUAL - Set Fire Control to MANUAL mode.
GUNNER (SLEW) LEFT - Orders the Gunner to slew the turret left with respect to the hull.
GUNNER (SLEW) RIGHT - Orders the Gunner to slew the turret right with respect to the hull.
GUNNER (SLEW) FRONT - Orders the Gunner to slew the turret to the front with respect to the hull.

Have fun with the profile!